High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests are more inclined to return for an additional stay when they can customize their room to suit their preferences. However, providing these features using old technology wastes lots of energy. As an example, there are plenty of problems with the old card key switches. Guests can put any card in the old switches, or they may ask for more than one card. Even if hotel desk refuses to provide more than one card to a guest, she/he may claim to have lost the card.
The traditional old technology of hotel card switch. There is also a large amount of over consumption of lights and AC energy due to things running even if guests aren’t inside their rooms, and also this may cause an economic loss for the owner. Obviously, no hotel owner would like to prohibit guests from using a comfortable stay, nor do owners expect guests to enter a dark or cold hotel. Nobody is to blame. Both guests and hotel owners have the legal right to fulfill their interests.
Some hotel owners think when they separate the AC from the main network, less energy will be consumed, while others think that motion sensors would be the solution. However, these approaches fail to resolve the problem. The AC is easily the most energy-consuming device of, and motion sensors could be nightmares since they only function according to movement detection, which means that the AC and lights might go off while a guest is sleeping or reading a novel. Nightmarish!
The TIS Automation Company provides the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has several options, together with a PIR motion sensor, a mild harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the newest means for hotel economical technology. By installing this door sensor in the entrance to a room, connecting it for the Energy Servant’s digital input, and programming the logic lines, the problem of room occupancy is completely resolved.
The subsequent logics could be defined for this particular sensor to control room energy without the discomfort for guests:
Logic 1: When there is any movement within the room, the occupancy mode will likely be on.
Logic 2: In the event the main door is opened and closed, a flag will switch on for just one minute to see if there is certainly movement in room. If no movement is detected after one minute, the program will activate energy-saving mode. This is valuable in situations each time a guest enters the room briefly. In energy-saving mode all lights are off except for a nightlight, which stays on for 3 hours in case there is certainly another guest taking a nap. Also, the AC will never be switched off, but its temperature will likely be decreased by 2 degrees. This can help save energy over time.
Logic 3: When the energy-saving mode is enabled and no movement is detected for longer than 3-5 hours, the nightlight and AC will be switched off automatically. Additionally it is possible to define lower temperature levels for your AC. Furthermore, the power Servant can turn the AC on/off if it recognizes that a balcony window/door is open. All this requires is adding a magnetic contact linked to the balcony window/door and programming the required smart decision. The light harvest sensor helps save energy by wscgid balcony lights off when there is enough sunlight.
Another practical and beneficial capability of this sensor is its built in thermostat, which helps maintain the right temperature constantly. This is very important to keep furniture fresh and intact. Also, in hot spots and even when the room is empty for a long period, humidity and bad smells is not going to be a problem within the room. This sensor may be programmed to alter AC to dry mode when the room temperature reaches or exceeds 28-30C degree. This may happen repeatedly during the day if necessary. An identical performance may be programmed in cold spots to prevent mold.
An alternative choice with this smart system is TV control. In the event the hotel supplies the guest with a room tablet, she/he will be able to control the room’s TV along with it. This sensor was placed in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The effect was considerably enhanced energy management and many satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and requires with just a few items and then in the most power efficient possible way. For additional information or even to plan a consultation, call us at www.tiscontrol.com